top of page

Trail and Access Road Cutting in Anderson County, SC

Nov 2
4 min read

Updated: 3 days ago

A lot of land in Anderson County is hard to use for one simple reason: you can't get into it. The back of the property is a wall of briars, saplings, and fallen limbs, and the only way through is on foot with a machete. Whether your land is near Belton, Honea Path, Williamston, Pendleton, Starr, Iva, or out toward Lake Hartwell, a cleared trail or access road can turn acreage you only look at into land you actually use.

Here's a plain look at how we cut trails and access roads with forestry mulching, what they're good for, and what to think about before the work starts.

Why Landowners Want Trails and Access Roads

Most of the trail work we're asked about comes down to a few goals:

  • Getting a truck, tractor, or side-by-side to the back of the property.

  • Reaching a deer stand, food plot, or hunting lane without fighting through brush.

  • Walking or riding trails for the family.

  • Getting to a fence line, a pond, or a creek so you can maintain it.

A good trail also makes every other job on the property easier. Once you can drive back there, checking fences, cleaning up storm damage, and managing the woods all take a lot less time.

Mulched access path cut through woods with logs along the edges, Anderson County, SC

How We Cut a Trail With Forestry Mulching

Old Glory Land Management runs an ASV RT-135 Forestry with a Prinoth 450S-1900 mulching head and a Case 90E with a Prinoth 450E-900 mulching head. The mulcher grinds brush, briars, saplings, and small trees where they stand and leaves the material on the ground as a layer of wood mulch.

On a trail job, that works out well for a few reasons:

  • We follow the route you want. You walk it with us or flag it, and we mulch along that line instead of opening up the whole tract.

  • The trees you care about stay. We can bend the trail around good hardwoods and pines rather than taking them down.

  • No brush piles. The material is ground up on site, so there's nothing to burn or haul off.

  • The mulch layer helps. It covers the bare soil on the trail bed, which helps with mud and erosion compared to scraped ground.

Anderson County has plenty of rolling ground and creek bottoms. Our machines can work on slopes up to 45 degrees, so a hillside doesn't automatically rule out a trail. We'll look at the grade and the soil with you and talk about the best line before we start.

Trails and Access Roads Are Not Driveways or Building Sites

This part matters. A mulched trail or access road is for getting around the property: hunting, recreation, maintenance, and light equipment. It is not a driveway for a house and it is not site prep for a building.

If you're planning a home, a shop, a barn, or any other permitted structure, the building footprint, the driveway, and the septic area need full land clearing with the stumps and roots removed. Mulching leaves stumps and roots in the ground, and that doesn't work under a foundation or a road that has to carry heavy traffic for years. We do full land clearing too, and we'll tell you up front which method your project needs. You can read more about both on our services page.

Open woods after underbrush mulching, with the trees kept and a mulched forest floor

Planning Your Trail or Access Road

A little planning before the machine shows up saves time and gets you a better result. Here are the things we talk through with landowners:

  • Where it starts and ends. Know where you want to enter the property and what you want to reach.

  • Width. A walking trail can be narrow. A road for a truck or tractor needs more room, and so does a route for a trailer.

  • Wet spots and creeks. Low areas stay soft, and work in or near creeks and wetlands can come with rules. Check with the county or the state before planning a crossing, and we'll plan the route around those spots where we can.

  • Property lines. Make sure you know where your line is, especially along a fence or a neighbor's woods.

  • What else needs doing. Many owners pair a trail with fence line clearing, underbrush thinning, or a cleared shooting lane while the equipment is already there.

What Affects the Cost

We don't post prices because every trail is different. What drives the cost of a trail or access road job is mostly:

  • The length and width of the route.

  • How thick the brush is and how big the trees are along the line.

  • The slope and the ground conditions.

  • How easy it is to get our equipment to the starting point.

  • Travel distance. A travel fee may apply depending on where the property is.

The simplest way to find out is to ask. Request a quote, and we're happy to walk the property with you.

Keeping Your Trail Open

Trails in the Upstate fill back in faster than most people expect. Briars, sweetgum, and other sprouts will move back into the opening, and storms drop limbs and whole trees across the path. Plan on a touch-up pass every so often, and clear downed trees soon after a storm before they block the route for good. Our post on clearing downed trees after a storm covers why it pays to deal with storm damage quickly.

Frequently Asked Questions

Can you cut a trail through really thick woods?

Yes. Thick brush, briars, and saplings are exactly what the mulcher is built for. Larger trees along the route can usually be worked around or taken out, depending on what you want.

Can a mulched access road be used as a driveway for a new house?

No. A driveway for a house or any permitted structure needs full land clearing with the stumps and roots removed. A mulched trail is meant for getting around the property, not for a house driveway or a building site.

Do you work outside Anderson County?

Yes. We're based in Laurens and work across the Upstate and beyond. See our service areas or our Anderson County page for more.

Get a Quote for Your Anderson County Property

Old Glory Land Management is a veteran-owned company founded in 2023 and based in Laurens, SC. If you're ready to open up a trail or access road on your Anderson County land, request a quote or call us at (864) 733-3304. We're available Monday through Friday, 7 AM to 5 PM.

Subscribe to our newsletter

Comments


bottom of page